Epson
The epson platform allows you to control a Epson projector from Home Assistant.
Device has to be turned on during initial configuration.
When you want to add a device for the first time, turn it on before following the integration steps.
Configuration
To add the Epson integration to your Home Assistant instance, use this My button:
If the above My button doesn’t work, you can also perform the following steps manually:
-
Browse to your Home Assistant instance.
-
In the bottom right corner, select the Add Integration button.
-
From the list, select Epson.
-
Follow the instructions on screen to complete the setup.
Supported features
- turn on/off
- set input
- set/get color mode
- increase/decrease volume
- mute/unmute audio
- send next/previous track
Supported devices
- Epson projectors supporting ESC/VP21 protocol.
Tested devices
- Epson EH-TW5350
- Epson EH-TW7000
To make this module work you need to connect your projector to your LAN. The best is to use iProjection app by Epson to test if it is working.