Adax
Integrates Adax heater into Home Assistant.
You can configure the heaters to use a local or cloud interface.
The local integrations only works with newer Adax heaters with both Bluetooth and wifi. Home Assistant uses Bluetooth to configure the heaters. For the local integration, you have to reset the heater by pressing + and OK until the display shows ‘Reset’. Then press and hold the OK button on the heater until the blue LED starts blinking before pressing Submit. Configuring the heater might take some minutes. Using the local integration will disable cloud communication and the Adax app will not work.
For the cloud integration, you’ll need the Account ID (which can be found in the Adax Wifi app, pressing ‘Account’). You will also need a credential, which you can create in the Adax app:
- Navigate to the Account tab.
- Go to Third party integrations.
- Select Remote API.
- Select Add Credential.
- Give some name to the created credential (e.g. ‘Home Assistant’) and copy the generated password.
Configuration
To add the Adax integration to your Home Assistant instance, use this My button:
If the above My button doesn’t work, you can also perform the following steps manually:
-
Browse to your Home Assistant instance.
-
In the bottom right corner, select the Add Integration button.
-
From the list, select Adax.
-
Follow the instructions on screen to complete the setup.