YoLink
Integrates YoLink Devices into Home Assistant.
Configuration
To add the YoLink integration to your Home Assistant instance, use this My button:
If the above My button doesn’t work, you can also perform the following steps manually:
-
Browse to your Home Assistant instance.
-
In the bottom right corner, select the Add Integration button.
-
From the list, select YoLink.
-
Follow the instructions on screen to complete the setup.
Home Assistant will use account linking provided by Nabu Casa for authenticating with YoLink, this service is provided for free and does not require a Nabu Casa subscription. The steps below are thus not required.
If you want to use separate credentials, please contact to obtain a `client_id` and `client_secret`. Then you can add your credentials via application credentials. Settings > Devices & Services > click the menu (three dots at the top right of the screen) and then **Application Credentials**. Enter your credentials in the pop-up window.
The integration is tested and verified for the following devices from YoLink:
- YS6602/4 YS6704 (outlet | plug)
- YS7103/4/5 (siren)
- YS7704/7705/7706 (door sensor)
- YS7707 (Contact Sensor)
- YS7804/5 (motion sensor)
- YS7903/4 (leak sensor)
- YS8003/4/5/6 (temperature/humidity sensor)
- YS7201 (vibration sensor)
- YS7606/7 (lock)
- YS4909 YS5001 (valve controller)
- YS5705/6 (switch)
- YS7A01/2 (CO & Smoke Sensor)
- YS4002/3 (Thermostat)
- YS4906/8 (Garage Door Sensor/ Garage Door Controller)
- YS5707 (Dimmer)
- YS6801/2 (MultiOutlet)
- YS3604 (FlexFob)
- YS7106 (PowerFailureAlar)
- YS4908 (Finger)