WeatherFlow
This integration is a local-only WeatherFlow integration that reads weather data from all WeatherFlow Tempest compatible weather station on the local network.
You may see slight deviations between the values reported in Home Assistant and the values in the WeatherFlow App. This is because the WeatherFlow app considers both forecasts and neighboring weather stations in addition to the local data used in this integration.
Configuration
To add the WeatherFlow integration to your Home Assistant instance, use this My button:
If the above My button doesn’t work, you can also perform the following steps manually:
-
Browse to your Home Assistant instance.
-
In the bottom right corner, select the Add Integration button.
-
From the list, select WeatherFlow.
-
Follow the instructions on screen to complete the setup.
Sensors
This integration will expose the following sensors:
- Air density
- Air pressure
- Dew point
- Feels like
- Humidity
- Illuminance
- Irradiance
- Lightning average distance
- Lightning count
- Precipitation
- Precipitation amount
- Precipitation type
- Temperature
- UV index
- Vapor pressure
- Wet bulb temperature
- Wind direction
- Wind direction average
- Wind gust
- Wind lull
- Wind speed
Diagnostic sensors
Additionally the following diagnostic sensors are available:
- Battery voltage
- Signal strength
- Uptime