Vodafone Station
The Vodafone Station integration allows you to control your Vodafone Station based router.
There is support for the following platform types within Home Assistant:
- Device tracker - presence detection by looking at connected devices.
- Sensor - external IP address, uptime, firmware, resources and network monitors.
- Button - restart router, dsl/fiber/internet key connections.
Configuration
To add the Vodafone Station integration to your Home Assistant instance, use this My button:
If the above My button doesn’t work, you can also perform the following steps manually:
-
Browse to your Home Assistant instance.
-
In the bottom right corner, select the Add Integration button.
-
From the list, select Vodafone Station.
-
Follow the instructions on screen to complete the setup.
Integration options
It is possible to change some behaviors through the integration options. To change the settings, go to Settings > Devices & Services. On the Vodafone Station integration, select the cogwheel. Then select Configure.
- Consider home: Number of seconds that must elapse before considering a disconnected device “not at home”.
Additional info
Device Tracker
Note: If you don’t want to automatically track newly detected devices, disable the integration system option Enable new added entities
.
Tested models
This integration was tested against the following models:
- Vodafone Power Station
- Vodafone WiFi 6 Station