Vallox
The vallox integration lets you control any Vallox ventilation unit that is supported by the vallox_websocket_api (follow the link for a list of supported units).
The fan platform of this integration allows you to turn on/off the complete unit via the toggle switch, control fan speed and select a ventilation profile.
The sensor platform exposes a number of relevant metrics like fan speed, various air temperatures, and humidity.
The switch platform allows locking heat recovery bypass.
The number platform allows to control supply air temperatures.
Configuration
To add the Vallox integration to your Home Assistant instance, use this My button:
If the above My button doesn’t work, you can also perform the following steps manually:
-
Browse to your Home Assistant instance.
-
In the bottom right corner, select the Add Integration button.
-
From the list, select Vallox.
-
Follow the instructions on screen to complete the setup.
Profile Switching
For convenient switching of ventilation profiles in the GUI, just click on the Vallox fan entity to get a drop-down menu to select from. Alternatively, the service fan/set_preset_mode can be used.
The four standard Vallox profiles are supported:
HomeAwayBoostFireplace
Fan Services
Service vallox.set_profile_fan_speed_home
Set the fan speed of the Home profile.
| Service data attribute | Optional | Description |
|---|---|---|
fan_speed |
no | Fan speed in %. Integer, between 0 and 100. |
Service vallox.set_profile_fan_speed_away
Set the fan speed of the Away profile.
| Service data attribute | Optional | Description |
|---|---|---|
fan_speed |
no | Fan speed in %. Integer, between 0 and 100. |
Service vallox.set_profile_fan_speed_boost
Set the fan speed of the Boost profile.
| Service data attribute | Optional | Description |
|---|---|---|
fan_speed |
no | Fan speed in %. Integer, between 0 and 100. |